LINK:
https://www.centralacwarehouse.com/Parts/cat1626223_4830345.aspx
SS3- in Pan Cut Sheet-CLICK HERE
The
Safe-T-Switch® Model SS3 detects rising water in A/C condensate drain
pans and interrupts the thermostat circuit to shut off the unit before
overflows and flooding occur. The Model SS3 is designed to install in
auxiliary (safety) drain pans. The included stainless steel clip snaps
easily in place on most pan rims and holds firmly. Compact footprint
fits well in tight spaces. Approved for use as a substitute for
auxiliary condensate drains in jurisdictions where the International
Mechanical Code applies.
Safe-T-Switch®
Model SS3 incorporates sealed, waterproof reed/magnet float switch
technology for long term, reliable performance with no exposed
electrical contacts to corrode, short out or fall off. Included sealed
and pre-wired 6-Foot, 18-guage lead cables require one electrical
connection during installation.
SPECIFICATIONS:
24 Volts A/C, 1.25 Amp GP Switching Current (Tested to UL 508 and
Listed by UL® at 6000 Cycles – Inductive Load). Reed Component Device is
Separately UL® Recognized at 2.5 Amps Max. Carry Current.
MINIMUM PAN DEPTH: 1-3/8 INCH
SS2- 90 deg Cut Sheet-CLICK HERE
The
Safe-T-Switch® Model SS2 detects down stream clogs in condensate drains
and interrupts the thermostat circuit to shut off the unit before
flooding occurs. Works with optional Safe-T-Gard® Model SG1 condensate
overflow alarm. The Model SS2 is designed for installation on auxiliary
drain pan outlets – usually on primary condensate drain pans. PVC SLIP L
body accepts a ¾-inch PVC pipe or stub adaptor. Compact footprint fits
well in tight spaces. Approved for use as a substitute for
auxiliary condensate drains in jurisdictions where the International
Mechanical Code applies.
Installation
options include auxiliary (safety) pan outlet installation,
installation on alternate primary drain outlets and inline installation
in primary condensate drains utilizing a 3/4-inch SLIP Tee.
Design
incorporates sealed, waterproof reed/magnet float switch technology
with potted electrical contacts for reliable performance in wet
environments. Float resets automatically and after the drain is cleared.
Included 6-Foot lead wires are prewired and sealed requiring one
electrical connection during installation – usually within the air
handler electrical cabinet.
Safe-T-Switch®
is UL® Listed to comply with UL 508 and most applicable building codes.
Safe-T-Switch® has been tested for 6000 cycles at 1.25 amps and listed
for use in a 24-volt circuits by Underwriters Laboratories®.
SPECIFICATIONS:
24 Volts A/C, 1.25 Amp GP Switching Current (Tested and Listed by UL®
at 6000 Cycles – Inductive Load). Reed Component Device is Separately
UL® Recognized at 2.5 Amps Max. Carry Current.
Schedule 40 PVC Slip Fittings Accept 3/4-inch Stub or Drain Line.
Package
Includes Pre-wired 6-Foot, 18 Gauge Lead Wires & 3/4-inch Threaded
Male X Slip Male Adaptor for 3/4-inch Female Threaded Pan Outlets.
SS1- In Line Cut Sheet-CLICK HERE
The
Safe-T-Switch® Model SS1 detects down stream clogs in condensate drains
and interrupts the thermostat circuit to shut off the unit before
flooding occurs. Works with optional Safe-T-Gard® Model SG1 condensate
overflow alarm. The Model SS1 installs inline at any downward slope from
vertical to horizontal. It can also be installed on auxiliary pan
outlets utilizing the plug included with the kit. PVC Tee body accepts a
¾-inch slip PVC stub or drain pipe with included bushing. Compact
footprint fits well in sloped drains and tight spaces. Approved for use
as a substitute for auxilliary condensate drains in jurisdictions where
the International Mechanical Code applies.
Installation
options include inline installation in primary condensate drains
vertical or horizontal, auxilliary (safety) pan outlet installation with
included plug and plugged installation on alternate primary drain
outlets.
Design incorporates
sealed, waterproof reed/magnet float switch technology with potted
electrical contacts for reliable performance in wet environments. Float
resets automatically and after the drain is cleared. Included 6-Foot
lead wires are prewired and sealed requiring one electrical connection
during installation – usually within the air handler electrical cabinet.
Safe-T-Switch®
is UL® Listed to comply with UL 508 and most applicable building codes.
Safe-T-Switch® has been tested and listed for use in a 24-volt circuit
at 1.25 amps 6000 cycles by Underwriters Laboratories®.
Safe-T-Switch®
Model SS1 comes complete with all fittings needed for installation on
¾” drains and threaded female pan outlets and a plug for installation on
auxiliary drain pan outlets. Switch/cap assembly removes easily to
facilitate cleaning or clearing of clogged lines.
SPECIFICATIONS:
24 Volts A/C, 1.25 Amp GP Switching Current (Tested and Listed by UL®
at 6000 Cycles – Inductive Load). Reed Component Device is Separately
UL® Recognized at 2.5 Amps Max. Carry Current.
Schedule 40 PVC Slip Fittings Accept 3/4-inch Stub or Drain Line.
Package
Includes Pre-wired 6-Foot, 18 Gauge Lead Wires, 3/4-inch Schedule 40
PVC Slip Plug, 3/4-inch Threaded Male X Slip Male Adaptor and 3/4-inch X
1-inch Reducer Bushing.
Safe-T-Switch SS2AP Cut Sheet-CLICK HERE
FEATURES
Condensate overflow switch
Magnetic reed switch
Connect to either red or yellow wire
Application
Detects
clogged A/C condensate drains and shuts off the system. Schedule 40
CPVC, plenum rated and listed to UL-2043. Use ¾” adapter to install on
the auxiliary outlet of the primary drain pan.
Safe-T-Switch SS103E Cut Sheet-CLICK HERE
FEATURES
Electronic probe sensor
5-wire design
Onboard LED indicator
5 amp carrying capacity
Either normally open or normally closed
Application
For primary drain line and auxiliary drain pan or auxiliary drain outlet and auxiliary drain pan
Can be installed horizontally or vertically or inline
Onboard LED indicates the condition of the unit at a glance
No moving parts
Please see the drop down box below to select a model (default is SS3)
Comentarios
Publicar un comentario